How to modify your car’s interior to fit your taste
You know the old adage that it’s OK to drive with a cracked windshield?
Well, it’s not OK to modify a car’s exterior to fit the tastes of the drivers around you.
But you can make it look like the owner didn’t notice.
Install the glass as a decorative piece and paint it black or chrome.
This piece of glass can be used for decorative purposes as well.
You can do this by either painting it black with a coat of paint or chrome, then adding some sort of decorative detail like an engraving or some sort.2.
Replace the windshield.
This is probably the most basic part of any car modification.
Most people do this on their own, but if you’re going to be modifying your car, you should do it by someone who has a little bit of experience.
It should be someone who understands the car better than you do.3.
Install a fog light.
You’ll need to do this after you’ve installed the fog light, too.
It’ll give you a nice, bright, clear signal that your car is in good working order.4.
Make a small patch in the hood.
It will look pretty.
If you want to make it a little more noticeable, you can paint it in a paint-over and add a little detail like a little “G” or a “G”.5.
Install new headlights.
This one’s a bit tricky, but you can do it with some creativity.
Start by trimming off the excess plastic from the bottom of the dash and trimming the headlights up about an inch.
Then, add some paint and the front bumper.
You might want to add some type of tint to the headlights, too, because you might want the white glare from the car to stand out better in the dark.6.
Install front lights.
These are also fairly simple to do, and they’re not a hard task either.
You just need to attach the light to the dash with some kind of cable that attaches to the bumper.
Then you’ll need some sort for the taillights.
You might need to add a couple of extra bulbs to the taills.
You’ll need a light stand, a small projector, some duct tape, a light source and a piece of wood.7.
Install some mirrors.
You don’t have to do anything crazy here, but some mirrors are going to look a little weird, so you might need a few pieces of cardboard, some twine, some electrical tape, some wire and some metal strips to help you install them.8.
Install rear lights.
The last thing you need to install is a rear light, but there are a few ways you can attach a mirror to the rear bumper to give you that extra little bit more of a sense of direction.9.
Install bumper lights.
If your car already has a bumper light, it doesn’t make a big difference whether you do this or not.
It’s going to take a little time and a bit of patience to get all of those lights to line up properly.
Once you’ve got everything in place, it should look something like this.
If it’s too dark to see the headlights and taillamps, just make a few small cuts to the back of the windshield and paint them in a different color.10.
Install fog lights.
Again, it won’t be that much of a task, but it might help a little.
Start with a few strips of duct tape and some twines.
Then use the strip of twine to fasten some lights to the dashboard.
The lights should be mounted to the lights of your car so you can see them clearly when they turn on.11.
Add a dash light.
This will make the entire dash look a lot more noticeable.
You should add some sort in your dashboard to illuminate the interior of your vehicle.12.
Install lights in the rear.
You may be tempted to start with the rear lights, but they’ll probably look a bit out of place if they’re installed like this on the outside of the car.
Make sure that your windows and doors are open so the headlights can shine in through the window.
You may also want to consider adding a dash lamp, too—just make sure it’s positioned as far out as possible.13.
Install tinted windows.
Some drivers prefer tinted glass, and you may need to replace a window if you decide to do so.
You need to have a tinted window, however, because it will help to lighten the dark outside of your house.
Here are a couple ways you could do it:1.
Replace an old window.
You could just replace the glass that you’ve already installed, but most of us have some sort that we use in our car that will allow us to see out of the windows.
If the window doesn’t have a built-in light, you could try this DIY method.2,3.
Replace a window that’s already tinted. If